If you're reading this, then I assume you have already read the first part of this tutorial series, in which we covered setting up a program, making it print "Hello World" to the console, as well as how to declare and set the values of variables.
Today, we'll be talking about conditions and loops.[^1] As with the last tutorial, I'll be writing most of the code snippets first and then explaining what exactly they mean and do right after.
# The `if` condition
Let's say you want to create a program that checks if a given number `i` is greater than or equal to 27. Well, you do it like this:
```java
public class Main {
public static void main(String[] args) {
// This is where the code from the first tutorial would be
// if I hadn't deleted it for visual clarity
// Also, side note: You can use "//" to create comments:
// lines that aren't interpreted as code.
int i = 15;
if (i >= 27) {
System.out.println("i is greater than or equal to 27!");
}
}
}
```
So what we see here is called the `if` condition. It's structured as follows: You write the word `if`, followed by *the condition*, which is wrapped in parentheses `()`. You can then open curly braces `{}`, and any instructions that are written between them will only be executed if your supplied condition holds true.
The condition can be any statement that can either be `true` (correct) or `false` (incorrect). In this case, we're comparing two numbers with each other; there are several other ways to compare two numbers: `>`, `<`, `>=`, `<=`, `!=` and `==`, where the last two mean "not equal" and "exactly equal".[^2]
An important thing to note at this point is that this behavior is *different* with `String` variables.[^3] Comparing if two strings are equal by using `==` will not result in the behavior you might expect. Instead, you should compare two strings using `equals()` as follows:
A condition like this (which can either be `true` or `false`) can also be stored in a `boolean` variable[^4] whose state can then be checked using a similar `if` statement:
System.out.println("i is greater than or equal to 27!");
}
```
The above code has the same effect as the code we looked at before. The cool thing about this method is that you can easily check if a condition *doesn't* hold true by simply adding an exclamation point `!` in front of any boolean variable:
```java
if (!i27) {
System.out.println("i is NOT greater than or equal to 27!");
Additionally, two boolean variables (or simply two conditions) can be chained together in two ways:
```java
int i = 15;
if (i == 12 || i == 13) {
System.out.println("i is either 12 or 13!");
}
if (i >= 10 && i <20){
System.out.println("i is somewhere between 10 and 20");
}
```
As you can see in lines 2 to 4, two pipes `||` represent the `OR` operator: A combined condition using it holds true if the left side is true, or the right side is true, or both sides are true.
As you can see in lines 5 to 7, two ampersands `&&` represent the `AND` operator: A combined condition using it holds true if *both* sides are also true.
You can also wrap your checks in parentheses `()` to create a more complex condition, similarly to how you would use them in a mathematical expression:
```java
int j = 10;
int k = 15;
boolean combination = (j == 12 && k == 13) || (j == 10 && k == 25);
System.out.println(combination);
```
The above code will cause `true` to be printed if `j` equals 12 and `k` equals 13 *or* if `j` equals 10 and `k` equals 25. Otherwise, `false` will be printed.
## `else`
If you want something *else* to happen if a certain condition doesn't hold true, then you can do something like the following:
```java
int i = 15;
if (i >= 27) {
System.out.println("i is greater than or equal to 27!");
} else {
System.out.println("i is less than 27 :(");
}
```
As you can see, writing `else` after any `if` statement causes the code contained in the following curly braces `{}` to only be executed if the `if` statement's condition *isn't* true.
Optionally, you can also combine the `else` with another `if` statement to check for a different condition. You can do this as many times as you want:
```java
int i = 15;
if (i >= 27) {
System.out.println("i is greater than or equal to 27!");
} else if (i <= 10) {
System.out.println("i is less than 27, but also less than or equal to 10");
} else {
System.out.println("i is somewhere between 11 and 26");
}
```
# The `for` loop
The `if` condition is already pretty powerful, because you can execute different code based on different situations. Another useful thing is the `for` loop. How it's written and what it does can be a bit complicated to understand at first, but I'll try to break the following example down for you:
```java
for (int index = 0; index <3;index =index+1){
System.out.println("The current index is " + index);
}
```
This specific `for` loop causes the following to be printed to the console:
```
The current index is 0
The current index is 1
The current index is 2
```
As you might be able to tell from that, a `for` loop causes any number of instructions in it to be executed a certain amount of times.
Its structure is pretty similar to the `if` statement's: First, you write the word `for`, followed by some loop instructions inside parentheses `()`, and then you open curly braces `{}` which contain the instructions that should be executed multiple times. The loop instructions contain three parts, which are separated by semicolons `;`:
-`int index = 0;` is the declaration of the *loop variable*: This is the instruction that will be executed *before* the loop starts running.
-`index < 3;` is the *loop's condition*: Before every time the loop's content is run, a check is done to make sure that this condition is still true. If it's not true anymore, the loop stops running.
If you want to exit a `for` loop before its condition turns to `false`, you can use the `break;` statement as follows:
```java
for (int index = 0; index <10000;index =index+1){
System.out.println("The current index is " + index);
if (index >= 2) {
break;
}
}
```
This loop has the same effect as the one we looked at before. Despite the loop condition specifying that it should repeat 10000 times, it is only repeated three times, because the condition on line 4 is evaluated every time and the loop is forced to stop running once it is true.
# Conclusion
In this tutorial, you (hopefully) learned what the `if` and `for` statements are and how to use them. By now, you should be able to write some more complicated code. As a little exercise, you can try to solve the following problem using the things you learned in the last two tutorials:
> Given a variable `i` and another variable `exp`, calculate if the result of `i`<sup>`exp`</sup> (`i` to the power of `exp`) is less than or equal to the value of another variable `j` (and print the result to the console accordingly).
If you're stuck, you can check out my solution [here](https://gist.github.com/Ellpeck/999bafe352f84d5e1f09750e026d5bbf).
Thanks for reading this tutorial and I hope it helped you out! If you have any feedback or questions about it, you can click the discussion link below and ask me on Twitter, or join my Discord server using the widget on the main page. Happy coding!
[^1]: I'm covering this topic *before* I cover what exactly classes and methods are. I think that conditions and loops take importance here, because they're used broadly in every language as well as most programs, whereas object orientation is a feature specific to some languages, as well as specific to more "complex" programs. It's also somewhat complicated, and I want to explain it right, because when I learned Java, I didn't even remotely understand it correctly at first.
[^2]: Note that, when *comparing* two numbers, two equals signs `==` are used. This is different from *assigning a value* to a variable, which only uses one equals sign `=`.
[^3]: Why exactly this is the case will be discussed later when we get into object orientation. The different behavior mentioned here is the case for any variable types which aren't so-called *native types*. Any variable whose type starts with an uppercase letter is not a native type, because it derives from a *class*.
[^4]: Named after [George Boole](https://en.wikipedia.org/wiki/George_Boole), a mathematician.
